bending stress的例句大全

The bending stress varies axially while the average axial stress changes a little.

此外,弯曲应力沿轴向有所变化,而平均应力基本不变.

The remote bending stress at the plate surface was measured.

板表面处的远场弯曲应力已被测出.

The bending stress is zero for the element at B.

在B处的单元体,弯曲应力为零.

Actually a bending stress a combination of tensile and compressive stresses.

实际上弯曲应力是压力和张力的综合.

Axial force has a great effect on deformation of rod or tubing with initial bending stress.

轴向力对具有初弯曲的杆(管)柱变形影响很大.

These outside conditions include environmental temperature, voltage, tensile stress, and bending load.

这些外部环境因素包括:环境温度, 外加电压, 拉伸应力, 弯曲荷载.

The life of bending fretting fatigue was significantly influenced by the alternating stresses. The higher stress level was, the lower fatigue life occurred. The S-N curves of bending fretting fatigue appeared shapes of C type.

对于弯曲微动疲劳，交变应力对寿命的影响十分显著，应力水平越高，微动疲劳寿命越低，弯曲微动疲劳的S-N曲线呈C曲线型。

Improvement of Experimental Equipment of Pure Bending Normal Stress

纯弯曲正应力实验装置的改进

A Stress Analysis of Damage Concrete Beams Under Pure Bending

损伤混凝土梁弯曲应力分析

In a beam type compensator a stress pattern produced by pure bending is frozen into the material.

在梁式补偿器中，其应力光图是由纯弯曲产生而被冻结在材料之中。

Application of Intelligent Instrument in Beam Bending Normal Stress Experiment

智能仪表在直梁弯曲正应力实验中的应用

It is investigated that the influence of Bauschinger Effect on yield strength of tube body by using four point bending test to simulate the tube making process at varying stress strain amplitudes.

采用X65钢板在四点弯曲加载条件下，模拟输油管制管过程中不同应变量下的应力&应变过程，研究包申格效应对输油管管体屈服强度的影响。

When the mandibular body fracture is under the premolar and molar of fracture side occlusion 、 the mandibular angle fracture is under the molar of fracture side occlusion, the stress of the upper fracture part is bending force and the lower is compressing force.

体部骨折患侧前磨牙、磨牙咬合以及角部骨折患侧磨牙咬合情况下，骨断层应力分布显示下部为张力带、上部为压力带。

When occlusion by molar and premolar of fracture part, the stress of upper fracture part was bending force and the lower was compressing force.

患侧磨牙、前磨牙咬合骨断层应力分布下部为张力带、上部为压力带。

Determination of Rational Completion Status of Cable-Stayed Bridges by Combined Bending Energy and Stress Balance Method

综合弯曲能量法和应力平衡法确定斜拉桥合理成桥状态

Study of local bending stress in bottom flange of ⅰ-beam crane rail

起重机工字钢轨下翼缘局部弯曲应力的研究

In a beam type compensator a stress pattern produced by pure bending frozen into the material.

在梁式补偿器中,其应力光图是由纯弯曲产生而被冻结在材料之中.

Metal bar wound be fractured under the rotating-bending fatigue alternating stress.

金属棒料在旋弯交变应力作用下会发生疲劳断裂.

Therefore, the bending moment may cause normal stress at the axis of gravity, and the concept of equivalent axial force is induced.

因此弯矩在形心处要引起正应力，从而引出所谓等效轴力的概念。

AIM : To analyze the stress distribution of the endodontic instruments subjected to bending and torsional loads.

目的:分 析根管器械在弯曲、扭转载荷下的应力分布.